Pumps, heaters, filters, spas and automation, fixed by a local team based in Milpitas.
When something on the equipment pad quits, Clean Co Pools is the pool repair Milpitas homeowners can get on the schedule quickly. We’re a local team based in Milpitas, CA, and we fix Hayward, Pentair, Jandy and Zodiac equipment.
The usual trouble spots are a pump that won’t prime, a heater that won’t fire, a filter with pressure problems and a spa that quit heating. Each one has its own section below, with a link to the full page for that repair.
A filter with a cracked manifold or a stuck valve can’t clean the water, no matter how often it gets washed. Pressure that climbs too fast and water that stays cloudy are the usual signs.
Our pool filter repair covers:
If the tank itself is failing, a new filter usually makes more sense than another repair.
Heater problems tend to show up in fall, when the first cold nights hit Milpitas and the heat goes back on after a summer off. A heater that clicks but won’t light, or shuts off after a few minutes, needs a look before it gets worse.
Our technicians repair:
The pump moves every gallon through your filter and heater, so when it fails, everything else stops with it. Grinding, humming without starting, air in the pump basket and drips at the seal are the signs to watch for.
Our pool pump repair includes:
A spa runs hotter and cycles on and off more often than a pool, so the heater and controls wear out sooner.
Our spa repair covers:
We work on standalone hot tubs and spas attached to a pool.
Clean Co Pools is a local pool repair company, based right here in Milpitas, CA. Our technicians work on Milpitas pools every week, so they see the same equipment brands and the same failures over and over. Most pool equipment repair comes down to getting the diagnosis right the first time, and that experience is what speeds it up.
Not every swimming pool repair fits in one of the sections above. We also take care of the problems in between:
If you can’t tell what’s wrong, describe what you’re seeing and we’ll let you know whether it sounds like a repair or a job for new equipment. Contact Clean Co to book a repair visit.
Beyond repairs, we also handle the weekly visit, new equipment and bigger projects.
Routine care for pools and spas, including weekly pool service, filter cleaning, spa cleaning and tile cleaning.
Pump, heater, filter and spa repair, all covered on this page.
When a repair no longer makes sense, we handle pool pump installation, pool heater installation, pool light installation and new filters.
Bigger jobs that don't come up every week: acid wash, green to clean, pool automation, salt systems and sand changes.
Short answers to the repair questions we hear most. For anything else, call (408) 317-7550.
Pool repair costs in Milpitas depend on what failed. A seal or gasket costs far less than a new motor or a heater part. We need to see the equipment first, so call (408) 317-7550 for a quote.
Watch for a pump that hums or grinds, filter pressure that climbs fast, a heater that won't stay lit, water under the equipment or cloudy water that won't clear. Any one of these calls for a repair check.
Repair it when one part has failed and the rest of the unit is sound. Replace it when the housing is cracked, parts are hard to find or repairs keep stacking up. See our pool equipment installations page.
Try the bucket test. Fill a bucket, set it on a pool step so both water levels match, and check again after 24 hours. If the pool dropped more than the bucket, you likely have a leak worth inspecting.
We repair Hayward, Pentair, Jandy and Zodiac pumps, heaters, filters and automation systems. If you have a different brand, call (408) 317-7550 with the model number and we'll tell you if we can help.
Clean Co Pools does. Our pool heater repair service covers gas and electric pool heaters, spa heaters, ignition problems and thermostat issues for homes across Milpitas.
Yes. We diagnose and repair pool automation, including control panels that stop running the pump, heater or lights on schedule. For a new system or an upgrade, see our pool automation page.
Yes. Pool plumbing repair is part of our equipment work, from leaking unions and fittings to valves that stick or won't seal. If water is pooling around your equipment, that's usually the place to start.
Yes. Our spa repair service covers spa heaters, pumps, jets, controls and leak detection, for standalone hot tubs and spas attached to a pool.
Keep the water balanced and get the equipment looked at every week. Unbalanced water eats heater parts and seals, and small leaks grow. Our weekly pool service includes an equipment check on every visit.
